Ardex A70 GYPFLO Calcium Sulphate Screed (see Options)

Ardex A70 GYPFLO Calcium Sulphate Screed (see Options)

Ardex A35 Mix Pre Blended Rapid Drying Screed (See Options)

Ardex A35 Mix Pre Blended Rapid Drying Screed (See Options)

Ardex A35 Rapid Setting Cement For Internal Screeds (See Options)

As low as £50.58

ARDEX A35 rapid drying cement for internal floor screeds.

  • Walk on after 3 hours
  • Install tiles and natural stone after 24 hours
  • Lay carpet, wood and vinyl floors after 24 hours
  • Bonded screeds 15-40mm
  • Unbonded screeds 50mm+
  • Floating screeds 75mm+ heavy use
    65mm+ light domestic locations
  • Ideal with underfloor heating systems
  • Can be pumped for fast application

Coverage:
1:4 mix Approx 0.37kg  per m2 per millimetre of thickness
1:5 mix Approx 0.31kg  per m2 per millimetre of thickness

Availability: In stock
Only %1 left
Product Code
18295-select

USE
ARDEX A 35 is used to produce bonded, unbonded and floating screeds for internal locations.

It can also be used for large repairs to existing cement/sand screeds. It is ideal for situations where early foot traffic and rapid hardening is required

ARDEX A 35 achieves rapid strengthening and will pass a BRE Screed (ISCR) Test after just 6 hours.

After a day, it will also exceed the acceptable minimum compressive and tensile bending strengths attained by ordinary cement screeds after 28 days. 

APPLICATION
The working time of the mixed mortar is approximately 1 hour at 20°C, therefore mixing, placing, compaction and trowelling off must proceed without delay.

The amount of mortar mixed and the area to be screeded should be limited so that trowelling off and finishing can be completed within this time

More Information
Colour N/A
Power Options N/A
Product Code 18295-select
Manufacturer Ardex
pdf
(Size: 220.5 KB)