Tilemaster Hygrometer for Moisture Testing

Tilemaster Hygrometer for Moisture Testing

Ardex WPM 200 Liquid Waterproof Membrane (See Options)

Ardex WPM 200 Liquid Waterproof Membrane (See Options)

Ardex DPM1C One Coat Damp Proof Membrane (See Options)

As low as £151.96

ARDEX DPM 1C one coat damp proof membrane and residual moisture suppressant

• Protects the final floor covering from moisture and rising damp
• Can be applied where a structural DPM is not present or is ineffective
• Suitable for use on surfaces with of moisture content (up to 98% RH)
• Suitable for use on Anhydrite/Calcium Sulphate based screeds
• Adheres to saturated concrete even at lower temperatures
• Walkable in 6 hours
• Suitable for use on cement/sand screeds containing water based under floor heating systems
• Apply ARDITEX NA direct without priming

Coverage:

  • 6kg  10-15m2
  • 10kg 18-25m2
  • 25kg 45-62.5m2
Availability: In stock
Only %1 left
Product Code
DPM1C-select

ARDEX DPM 1 C is a one coat solvent free, low viscosity, two component epoxy resin. After hardening, ARDEX DPM 1 C produces a membrane which can accommodate hygrometer readings up to 98% with high inherent bond strength.
Excellent resistance to water, grease, oil, aqueous salt solution and dilute mineral and organic acids.

TECHNICAL DATA
Density at 20°C: 1.54
Working Time: 20 minutes at 20°C
Over Coating if required: 6-8 hours at 20°C
Walkability at 20°C: After 6 hours
Colour: Black

More Information
Colour Black
Power Options N/A
Product Code DPM1C-select
Manufacturer Ardex
pdf
(Size: 242.6 KB)