Sigma 4 NEX Push Series Tile Cutters (See Options)

Smooth motion from scoring to breaking position is achieved by a small vertical movement of the handle
Features a large tile support table and swivelling measurement bar which supports the tile, it can rotate 45° in both directions and is pivoted at the centre of the cutting line, allowing the real measurement of the required cut piece.
A 45° second measurement scale gives the length of the diagonal and the rapid positioning button makes it easier to set to standard angles far quicker.
Pushing away from the lateral stop measurement bar rather than pushing to it, allows a much stronger scribe mark on the material for superior cutting with the added advantage of the lateral stop measurement bar being conveniently close to the operator.
Precision, practical use and low weight are the main characteristics of Sigma tile cutters.
Made from high-resistance aluminium alloy and steel for great rigidity.
The special shape of the grip allows tiles to be cut at any point.
Plastic fittings on the base of the breaker, to prevent marks on the material being cut.
Supplied with a scoring wheel that is a long life and bearing mounted made from tungsten carbide.
The tile is snapped by simply pressing down with the breaking feet near the edge of the tile.
Note:Cutting tiles 15mm + in thickness is not always possible with manual cutters and wet cutting should be considered.